[Amps] RE GI7B issues

[Roland AH6RR]

What is the plate idling current? I had one of them do the same thing but the idling current was way too high. Bias voltage should be between 25-32V after I set my bias voltage to 27V I have been using the same 2 tubes in my MLA-2500 for over 2 years now with 1.2 KW out. I used the stock fan and added a fan on top of the amp to draw the hot air out. My plate idling current is 100 mils at 2600V for 2 GI7B Check out the Bias Voltage if it is too high it will smoke the tube.