[Amps] RL Calculations

[Phil Clements]

:
> 
> >  My question is for this calculation do you use the Voltage that
> >appears on the tube plate key Up, ( my case 3900 VDC)  or Key Down 3500
> >VDC.
> 
> REPLY:
> 
> Use the key down value, since that is what is actually generating the
> RF.

That is the correct academic answer, Bill, but in the real world, if he sets
up the tank for 1200-1300 ohms, the difference cannot be measured.

(((73)))
Phil, K5PC