[Amps] Simpson 260 question

[Bill, W6WRT]

ORIGINAL MESSAGE:

On Mon, 3 Aug 2009 21:46:08 +0200, Karl-Arne Markström <sm0aom at telia.com> wrote:

>When measuring plate voltages, a properly insulated voltage divider made of 
>many series connected high-voltage resistor is the recommended method.

REPLY:

Even better is to make the connection to the meter with the power off, turn on
the power, take the measurement and turn off the power. In other words, don't
touch the meter, the probes, or anything they are touching.

73, Bill W6WRT