[Amps] HL-2K

[bill price]

The neutral is to carry the unbalanced current back to the pole transformer. The ground is to never have a return load until a fault, the ground is their for your safety 

 
> Date: Fri, 28 Aug 2009 03:27:47 -0400
> From: sub1 at rogerhalstead.com
> To: patriot121 at msn.com
> CC: amps at contesting.com
> Subject: Re: [Amps] HL-2K
> 
> 
> 
> MIKE DURKIN wrote:
> > Iv come to a misunderstanding about 240V hookup. Is the neutral supposed to be connected to the case and the ground too, from a 4wire drop?? I cant find a description of the 240V hookup in the HL-2K manual when pertaining to the neutral and ground.
> >
> > If any one has a HL-2K from Tokyo HyPower and running on 220V/240V how exactly did you do with these before mentioned connections ...
> >
> > 
> The manual should show you were for a 4 wire hook up the Red (110), 
> Black(110), and White(neutral) connect. The Green (OR Bare) wire goes 
> to chassis ground. Both the Red and Black wires are 120 to neutral with 
> 240 between them. With the 3 wire hook up the connections are the same, 
> but chassis ground is to the socket ground, or shack ground.
> > KC7NOA
> >
> > _________________________________________________________________
> > Windows Live: Make it easier for your friends to see what you’re up to on Facebook.
> > http://windowslive.com/Campaign/SocialNetworking?ocid=PID23285::T:WLMTAGL:ON:WL:en-US:SI_SB_facebook:082009
> > _______________________________________________
> > Amps mailing list
> > Amps at contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> >
> > 
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

_________________________________________________________________
Windows Live: Make it easier for your friends to see what you’re up to on Facebook.
http://windowslive.com/Campaign/SocialNetworking?ocid=PID23285::T:WLMTAGL:ON:WL:en-US:SI_SB_facebook:082009