[Amps] Advice

[RICHARD SOLOMON]

Some years ago I had an LK-450, nice amp. I would not hesitate to
convert it to 6 Meters. After all, you are stripping out all the RF parts
and only using the chassis, socket and power supplies.

The trick is in getting the input and output circuits properly done. To
some folks that borders on Alchemy and not Science !!

There is a construction article in the West Coast Handbook that uses
a single 3-400 that you could use as a guide.

73, Dick, W1KSZ

> From: plamarc1 at verizon.net
> To: amps at contesting.com
> Date: Wed, 2 Dec 2009 10:33:14 -0500
> Subject: [Amps] Advice
> 
> I have an LK 450 Amp Supply amplifier with vacuum relays etc that I'm
> considering the conversion to 6 meters.  Want to hear from you if this is
> the way to go or should it be another model for conversion?
>  
> Thanks,
>  
> Phil
>  
> 
> Philip LaMarche 
> LaMarche Enterprises, Inc.
>  <http://www.instantgourmetspices.com/> www.instantgourmetspices.com
> 
> www.w9dvm.com <http://www.w9dvm.com/>  
> 800-395-7795 pin 02 
> 727-944-3226 
> FAX 727-937-8834 
> NASFT 30210 
> 
> K3  #1605
> 
> CCA 98  00827
> CRA 1701
> 
> W9DVM 
> 
> 
>  
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps