[Amps] Advice

[Ron Youvan]

> The chart that I am looking at says: 8877 requires 35 cu ft at .41 back
> pressure.

> A 3CX800A7 requires 19 cu ft at .5 back pressure. Two of those would require
> 38 cu ft at .5 back pressure. 

   I assume these values are at the maximum power dissipation, running a tube at reduced power 
dissipation allows operating at reduced cooling effort, so two tubes splitting a given amount of 
dissipation would not require twice the cooling.
-- 
    Ron  KA4INM - The only real problem is death is so final.