[Amps] Chinese DIN connectors

Mike noddy1211 at sbcglobal.net
Thu Dec 10 13:21:44 PST 2009


You might try plugging the them into a socket before you solder them, it
helps sink the heat away and keep them aligned.

Mike, K6BR

-----Original Message-----
From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On
Behalf Of Ryan Foster


The din connectors I got were pretty cheap, kind of hard to work with-- it
was really easy to melt them when you are trying to solder wires in.  You
can't really find any good ones out there though, so I would just order a
few extras in case you melt one or two.

Besides the products being what you probably already expect being Chinese,
they are a pretty decent company, and I will order from them again.  I don't
remember if the dins were xtar, but at the time I got them, the ones I got
were the only din connectors for whatever pins # I needed (for an ft-897 and
ft-857, I can't recall how many pin those are, but they were mini-din.  I
would imagine full size din would be no problem whatsoever.)

--Ryan w8cya

On Thu, Dec 10, 2009 at 12:41 AM, <K1SG at aol.com> wrote:

> I need to get some 7-16 DIN connectors, and most of what I'm seeing is
> coming out of China. Does anyone have any experience with XTAR connectors,
> or
> with rfsupplier.com in Shenzhen, Guangdong Province China?
>
> Steve  Gilbert
> K1SG
> K1SG at AOL.com
> FN42fe
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>



-- 
"If someone has a gun and is trying to kill you, it would be reasonable to
shoot back with your own gun." -- The Dalai Lama, May 15, 2001
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps
No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.5.426 / Virus Database: 270.14.98/2552 - Release Date: 12/08/09
07:34:00



More information about the Amps mailing list