[Amps] MFJ Analyzer for adjusting matching network...

[Vic K2VCO]

KB0NLY wrote:

> ""Make up a resistance value close to this number with low inductance resistors

Make sure they are *really* low-inductance. Many modern film-type resistors are made by 
cutting a spiral groove in a conductive film. Old-style carbon resistors are good, but 
they tend to change value as they age, so measure with an ohmmeter.
-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco