[Amps] turns = henries question

[Phil Clements]

> I discovered the schematic is not exactly correct for other component
> placement & values, I'm not surprised the plate choke values are
> different also.
> 
> This choke is for a pair of 3CX800A7s at 2.4KV

All you need worry about for a 6-meter choke is that all resonances are
above 54 MHZ. 45 uh is plenty for this. Just remove half of the turns,
including the burned part, and you will be fine. 60 uh seems a bit much for
6-meters.

(((73)))
Phil, K5PC