[Amps] 47ohm 2W resistor, who still has them?

[David Craig]

    You don't need carbon comp- use a pair of 100 ohm 5w Metal Oxide, Mouser 
PN 286-100-RC.  Make the strap from the tube anode to the plate choke as one 
piece, make a "U" just big enough to fit 2 resistors inside, drill a whole 
for the leads and solder with silver solder.  That x 2 & you are done.


----- Original Message ----- 
From: "KB0NLY" <kb0nly at mchsi.com>
To: <amps at contesting.com>
Sent: Saturday, February 21, 2009 2:09 PM
Subject: [Amps] 47ohm 2W resistor, who still has them?


> Looking online it would appear that Mouser and Digi-Key no longer have 
> 47ohm 2W carbon comp resistors for making parisitics.  They are listed in 
> the catalog but show up as non-stocked or obsolete on their websites.
>
> The only other source i could find is surplus sales of nebraska, and they 
> want a hefty $5 each for them.
>
> If anyone knows a place that still sells them let me know, or if you have 
> any that you could part with for cheap let me know.  I need to make a new 
> parasitic for the 6m amp i am building.  My supply dried up from the last 
> SB-200 i worked on.
>
> 73,
>
> Scott KB0NLY
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>