[Amps] NCL-2000 meter lamps

[Carl]

Because the NCL runs close to 14V and the bulbs rapidly burn out. You 
can replace with 18V versions.

Carl
KM1H


----- Original Message ----- 
From: "Frank T Brady" <franktbrady at comcast.net>
To: <amps at contesting.com>
Sent: Wednesday, January 07, 2009 5:13 PM
Subject: [Amps] NCL-2000 meter lamps


> Hello,
> I recently purchased a ncl-2000 as my first amp.
> The meter backlight bulbs were dimly glowing just brightly enough to 
> see
> the filaments.
> I checked the bulbs and they were not the type shown in the schematic.
> I bought the 'proper' bulbs and they had the same problem.
> I (finally) looked at the wiring and, rather than being wired in
> parallel across the filament winding (like the "on" lamp) the bulbs 
> are
> wired in series between the ac voltage source and ground.
>
> Before I start rewiring, I thought I'd see if anyone else has seen or
> hear of such a mod/kludge or know of any reason why someone would do 
> this?
>
> Thanks and 73,
> Frank w0ecs
>
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>