[Amps] 3CPX1500A7 Fil Voltage

[DAVE WHITE]

Thanks to those who pointed this out.  I hadn't seen previous discussions.

Hey, I learned something today!  Thanks folks.

cheers

Dave G0OIL

--- On Fri, 9/1/09, Dennis W0JX <w0jx at yahoo.com> wrote:
From: Dennis W0JX <w0jx at yahoo.com>
Subject: [Amps] 3CPX1500A7 Fil Voltage
To: amps at contesting.com
Date: Friday, 9 January, 2009, 6:52 PM

This issue has been discussed extensively on this and other reflectors in the
past.The filament design and construction is the same as the 8877/3CX1500A7
which runs at 5.0v. For pulse service, the filament voltage is cranked up .5
volts.
 
For use in ham amplifiers, the 3CPX1500A7 should run at the 5.0 volt spec and
it will do fine.
 
73, Dennis W0JX/8


      
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps