[Amps] 3cx3000A7

[Bob Maser]

Why not go to WD7S's website and buy one of his, which will handle 200W?  It 
is a nice unit and small.  I went in a slightly different direction because 
I found an Omega tuned input unit at Dayton a few years ago and it was the 
unit that was used by Amp Supply in their LK series amp.  The only problem 
with these ready made boards is that they are a pain to adjust once 
installed up under the RF deck.  I adjusted mine outside the unit and it was 
under 1.5:1 SWR once installed.

Bob W6TR
----- Original Message ----- 
From: "Dennis Watkins" <andromeda at wildblue.net>
To: <Amps at contesting.com>
Sent: Monday, January 12, 2009 3:59 AM
Subject: [Amps] 3cx3000A7


> Anybody have a design example that will show how the input circuitry
> is put together and what values are used??
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps