[Amps] Grounded Grid(Screen) 4CX250B power gain

[Steve Katz]

Can you measure IMD?  That would be the telling data.
 
WB2WIK/6

________________________________

From: amps-bounces at contesting.com on behalf of Hsu
Sent: Sun 7/19/2009 4:15 PM
To: gdaught6 at stanford.edu
Cc: amps at contesting.com
Subject: Re: [Amps] Grounded Grid(Screen) 4CX250B power gain



Hi, George,
I just  modyfy the Henry TEMPO 2001
  convert the 3CX400A7  to 4CX250B in GG configation, tied the cathode and G1(serial a 100ohm resistor) together.
    I'll test it today.
     73!Hsu
----- Original Message -----
From: <gdaught6 at stanford.edu>
To: "Hsu" <hsu4qro at gmail.com>
Sent: Monday, July 20, 2009 5:26 AM
Subject: Re: [Amps] Grounded Grid(Screen) 4CX250B power gain


>> Nin hao George,
>>    Have your built the amplifier like this GG configation?
>
> No, I haven't built one in GG.  I always use "passive grid configuration", with a
> resistor driven by the exciter, and the grid just attached to the top of the resistor.
>
> 73,
>
> George T Daughters, K6GT
> CU in the California QSO Party (CQP)
> October 3-4, 2009
>
>
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps