[Amps] grounded grid 813 x4

[Carl]

I placed mine in a box configuration, and tied all the individual socket 
pins together with copper strap and then to a central ground point in the 
middle. Its fully stable on all bands at 2900V key down.

Carl
KM1H



----- Original Message ----- 
From: "jonathan white" <jonathan.white20 at btinternet.com>
To: <amps at contesting.com>
Sent: Monday, July 27, 2009 7:36 AM
Subject: [Amps] grounded grid 813 x4


> Hi.
> This has probable been asked before on this group,but... Is it good
> practice to physically tie the grids to ground via one connection,or via
> low value resistors and decoupling capacitors. I was going to go for VHF
> practice and go for direct grounding,but would like some comments before
> progressing this project.
>               73`s Jon
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps