[Amps] grounding grids

[Bill Fuqua]

Maybe to measure individual grid currents?
That would be the only reason I can think of.
73
Bill wa4lav

At 08:35 PM 7/27/2009 -0400, Herzog wrote:
>RE: > >Hi.
>  > >This has probable been asked before on this group,but... Is it good
>  > >practice to physically tie the grids to ground via one connection,or via
>  > >low value resistors and decoupling capacitors. I was going to go for VHF
>  > >practice and go for direct grounding,but would like some comments before
>  > >progressing this project.
>  > >               73`s Jon
>
>REPLY:
>
>I'm curious - what would be the reason for using resistors and
>decoupling caps?
>
>73, Bill W6WRT
>===========================
>Herzog proffers a reason, to be able to measure the grid current.
>_______________________________________________
>Amps mailing list
>Amps at contesting.com
>http://lists.contesting.com/mailman/listinfo/amps