[Amps] 6 Meter Amp (April 2008 QST) Question

[Joe Subich, W4TV]

>From the article: 

  > For the primary side, since voltages were under 250 V, 
  > we used 6-pin AMP connectors and 14 gauge wire.

The article also states the parts list, etc. is available at: 
  www.arrl.org/files/qst-binaries 

A check of the ARRL site reveals: 
  www.arrl.org/files/qst-binaries/Gilbert%20et%20al%200408.zip


73, 

   ... Joe, W4TV 
 




> -----Original Message-----
> From: amps-bounces at contesting.com 
> [mailto:amps-bounces at contesting.com] On Behalf Of RICHARD SOLOMON
> Sent: Wednesday, June 03, 2009 4:38 PM
> To: Amplifier Reflector
> Subject: [Amps] 6 Meter Amp (April 2008 QST) Question
> 
> 
> 
> They remove the Power Transformer and use connectors for the AC Line
> 
> and HV AC. The HV AC looks like a 3 or 4 pin Molex, but the 
> AC Line (Brown
> 
> Connector) is not familiar.
> 
> Can anyone tell me what make it is ?
> 
>  
> 
> Thanks, Dick, W1KSZ _______________________________________________
> Amps mailing list
> Amps at contesting.com http://lists.contesting.com/mailman/listinfo/amps