[Amps] Titan quits query more

[Jim W7RY]

 Have you checked the interlocks on both the RF deck and the power supply?

73
Jim W7RY

----- Original Message ----- 
From: "Charles Harpole" <k4vud at hotmail.com>
To: <amps at contesting.com>
Sent: Friday, June 26, 2009 11:51 PM
Subject: Re: [Amps] Titan quits query more


>
> Thanks for your thoughtful reply.
> So far, I have 220VAC on the power supply
> input socket, and all three of the fuses are
> ok.  The two on the rear are ok and the
> fuse originally located down in the middle
> of the p.s. is ok.  I do not know that this
> unit has "circuit breakers."  If so, where
> are they located?  I have not opened
> the units yet.  It is still dead, i.e., no
> response to the "on" switch.  73
>
> Charles Harpole k4vud at hotmail.com
>
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.12.92/2203 - Release Date: 06/26/09 
05:53:00