[Amps] Clips for oil-filled capacitors

[Carl]

I gave up looking for the right sizes and make my own. A bit of steel, a 
shear and threaded rod. Roll the top and braze or weld on the rod. A bit 
of paint and youre done.

Another way that comes to mind for a basic basement job is 3 aluminum, 
brass or steel strips, 2 for the sides and a top piece. Threaded rod top 
and bottom and some of that super strong epoxy.

Carl
KM1H




----- Original Message ----- 
From: "Roger Parsons" <ve3zi at yahoo.com>
To: "Amps" <amps at contesting.com>
Sent: Thursday, March 19, 2009 7:50 PM
Subject: [Amps] Clips for oil-filled capacitors


>
> After looking at the nice pictures of YC156 amplifiers, my mind 
> wandered to the large oil-filled capacitors. The capacitors themselves 
> are easy enough to get, but does anyone know of a source for the 
> mounting clips? (The ones that clip over the top edge of the capacitor 
> and are bolted to the chassis at the bottom.)
>
> Thanks
>
> Roger
> VE3ZI
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps