[Amps] buck - boost transformer application

[Carl]

It all depends what your primary current is however with a 24A winding 
it should have very little regulation effect on a legal amp.

Ive been using bucking transformers on vintage ham and house radios for 
decades.

Carl
KM1H


----- Original Message ----- 
From: "Ronald Brown" <rg52brown at yahoo.com>
To: <amps at contesting.com>
Sent: Monday, May 18, 2009 3:58 PM
Subject: Re: [Amps] buck - boost transformer application


I have a HV power supply that sits at 4950v no load. I am thinking of 
dropping the HV primary by using a 15.8v 24a transformer as a 
buck -boost device by putting the secondary in series with the HV 
transformer primary. Can anyone see a problem with this approach instead 
of a variac ?
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps