[Amps] AL-1200 Relay Confusion

[gudguyham at aol.com]

THE STEP START RELAY IS 120 VAC AND THE CONTACTOR RELAY IS 12 VDC.  If you see it anyway else your not reading a schematic correctly


-----Original Message-----
From: donroden at hiwaay.net
To: amps at contesting.com
Sent: Sat, Oct 24, 2009 11:27 am
Subject: Re: [Amps] AL-1200 Relay Confusion



If the AC impedance is high enough ........
Don WA4NPL


uoting "RICHARD SOLOMON" <w1ksz at q.com>:
> A quick look at the circuit and parts list shows it as a 12 VDC Coil, BUT
 the schematic shows the Coil across 110 vac.>
 73, Dick, W1KSZ

 _______________________________________________
 Amps mailing list
 Amps at contesting.com
 http://lists.contesting.com/mailman/listinfo/amps


______________________________________________
mps mailing list
mps at contesting.com
ttp://lists.contesting.com/mailman/listinfo/amps