[Amps] FW: 3-500z Silly question
MIKE DURKIN
patriot121 at msn.com
Sat Sep 5 11:39:30 PDT 2009
From: patriot121 at msn.com
To: w7ry at arrl.net
Subject: RE: [Amps] 3-500z Silly question
Date: Sat, 5 Sep 2009 10:25:16 -0700
Center Tap ??
Measurements have been made from the choke to each 3-500z filament ... then divided by 2 ...
I have solved my issues with marginal voltage for my 24V relays. I was hoping that the 12V witch was running 17V would be enuff to energize them .. but alass no .... so a voltage doubler was added and now i have good voltage and action from/for the relays.
New question .... im using a MFJ 259 analyzer to check the input C-L-C network's for each band ... and its not good.
The question is - does not having plate voltage affect the input impedance and frequency that much ( alot !!!) - im thinking that the input caps have been overloaded and now cooked ( wich might mean that the tubes in this amp were over driven too )
KC7NOA
> Subject: Re: [Amps] 3-500z Silly question
> Date: Sat, 5 Sep 2009 07:32:23 -0700
>
> How are you derive the center tap for the cathode connection with DC
> supplied to the filament?
>
>
Hotmail® is up to 70% faster. Now good news travels really fast. Try it now.
_________________________________________________________________
Windows Live: Make it easier for your friends to see what you’re up to on Facebook.
http://windowslive.com/Campaign/SocialNetworking?ocid=PID23285::T:WLMTAGL:ON:WL:en-US:SI_SB_facebook:082009
More information about the Amps
mailing list