[Amps] Tubes, made in the USA, in the olden days; Films?

[Randall, Randy]

He should offer classes on tube and jig making.  The guy is talented!

Randy AB9GO

-----Original Message-----
From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On Behalf Of Bill, W6WRT
Sent: Tuesday, August 31, 2010 1:37 PM
To: amps at contesting.com
Subject: Re: [Amps] Tubes, made in the USA, in the olden days; Films?

ORIGINAL MESSAGE:

On Mon, 30 Aug 2010 17:32:50 -0400, "Mike McCarthy, W1NR"
<lists at w1nr.net> wrote:

>Rolling your own vacuum tubes:
>
>http://videosift.com/video/How-to-Make-Your-Own-Vacuum-Tubes
>
>Mike, W1NR

REPLY:

Don't know which is more impressive - making the tube or making the
machinery for making the tube. Quite a video, either way. Thanks.

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps

Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information.  Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.