[Amps] Bypassing electrolytic capacitor stacks

[K1SG at aol.com]

In a thread a couple of months back, there were comments about keeping  RF 
out of the stack of electrolytics in a power supply. The suggestion  was to 
bypass the stack with a .001 MFD HV disc.
Does it matter if you bypass the stack directly across the electrolytics  
(plus to minus), or from plus to GROUND?  The difference is that  there's 
usually a 50 ohm 50 watt (or something) resistor between negative and  ground. 
 
Steve  Gilbert
K1SG
K1SG at AOL.com
508-435-9133