[Amps] HB amps - what you can build with no tools

[Gary Smith]

I was visiting a friend in MA who was doing some repair work to his 
house which was built by shakers over 200 years ago. There was a part 
of the inner wall removed showing the infrastructure. He pointed out 
the detail the craftsmen had done to the innermost parts of the 
woodwork where no one would ever see them. He explained that to them, 
that to leave even the inner parts of the construction as less than 
perfect would be to disrespect the higher power and with that, every 
piece of wood behind the inner wall was smoothed as if it were sanded 
with fine grit paper. It was quite beautiful to see.

Bet they would have made some beautiful radio gear.

Gary
KA1J

> My amp building elmer told me once...
> 
> A hole that you cannot see is a perfectly drilled hole.  And a jagged hole 
> with trim covering the jagged hole is also a perfectly formed hole.
> 
> A guy can cover up a lot of rough cut sins with this philosophy and only 
> when a guy takes the thing apart physically would he see it.
> 
> 73/jeff/ac0c
> 
> 
> --------------------------------------------------
> From: "Ryan Foster" <foster.ryan at gmail.com>
> Sent: Monday, February 01, 2010 10:32 PM
> To: <amps at contesting.com>
> Subject: Re: [Amps] HB amps - what you can build with no tools
> 
> > I second this question!
> >
> > Also what gauge steel is that?
> >
> > --Ryan w8cya
> >
> > On Mon, Feb 1, 2010 at 9:03 PM, Roger <sub1 at rogerhalstead.com> wrote:
> >
> >> Very nice job of construction.
> >>
> >> How did you fold the edges of the channel across the top, just in front
> >> of the tube?
> >> And...for the record, with all the anti, this and that I have on here, I
> >> saw no warnings of any problems.
> >>
> >> 73
> >>
> >> Roger (K8RI)
> >>
> >>
> > _______________________________________________
> > Amps mailing list
> > Amps at contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> > 
> 
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>