[Amps] Henry Classic series blowers
Donald Fox
taurusshoguy at yahoo.com
Tue Jul 20 23:04:52 PDT 2010
I submit this information hoping to help someone down the line who needs to repair or replace the blower in their Henry Classic series console.
I have found that earlier Classic consoles except the base 2K used the Dayton 2C915 blower which is a 230 volt unit.
It appears that the 2C915 is no longer made. I found that the seized blower in my current 3002A console is a Dayton 3M725.
I found a replacement motor assembly under the 3M725 number through Grainger for a whopping $47 out the door. This was actually the preferred method of replacement as I am guessing that Henry added the airflow switch in house.
By installing a new motor on the existing housing, I avoided having to move the switch to a new unit. From what I can tell, it looks like the 3M725 motor "could" work for the older 2C915 also, but I have not physically tried it.
YMMV Don N8ECH
More information about the Amps
mailing list