[Amps] Clipperton-L parasitic suppressors

[Carl]

No offense Alek but the masses on here dont believe in voodo science as they 
do on the forum you just arrived from. You might want to search the archives 
on the subject.

Larry, for a real suppressor that works get a Xicon 50 Ohm 5W MOX resistor 
and a pair of 100pf 500V silver micas for each suppressor from Mouser.

Lay a resistor and the original (or a clone) in parallel. Connect a cap 
between them at both ends. Wire it dead bug or on perf board.

Carl
KM1H


----- Original Message ----- 
From: "Alek Petkovic" <vk6apk at bigpond.com>
To: "Larry" <w6nws at arrl.net>; "Amps" <amps at contesting.com>
Sent: Friday, March 12, 2010 4:57 PM
Subject: Re: [Amps] Clipperton-L parasitic suppressors


> G'day Larry,
>
> At the risk of offending the masses, don't worry what value they are.
> Just go to http://www.somis.org  and scroll down to
> <http://www.somis.org/Price-Info.html>Price List--Information Sheet
> and order yourself a kit for 4x572B. Much simpler and much better.
>
> If you still wanna know the value of the original, they are as you
> said. In the circuit they are R6 and R7 and the parts list quotes
> them as being 100 Ohm, 2 Watts.
>
> Cheers, Alek
> VK6APK
>
> At 05:33 AM 13/03/2010, Larry wrote:
>>I have cleverly filed my Clipperton-L doc. I am hoping someone can
>>help. The parasitic
>>suppressor resistors have broken. I believe they are 100 ohm 2W
>>composition. Can
>>anyone confirm the value? I am not sure what caused the breakage at
>>this point.
>>
>>73, Larry  W6NWS
>>_______________________________________________
>>Amps mailing list
>>Amps at contesting.com
>>http://lists.contesting.com/mailman/listinfo/amps
>
>
> http://www.qrz.com/db/vk6apk
> http://www.qrz.com/db/vk6py
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps