[Amps] MLA-2500 retrofit.

[Doug Renwick]

I have a pair of Eimac 8875's that are surplus.   I purchased them from
W2CQM/3 a few years ago based on his guarantee that they produced 1200w
output with 2600vdc plate voltage and 100w of drive on his test bench.
I have never installed or tested them.  If anyone is interested they can
contact me directly.

Doug/VA5DX  

I'll run the race and I will never be the same again. 

-----Original Message-----
From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com]
On Behalf Of Jim Thomson
Sent: March 2, 2010 10:48 PM
To: amps at contesting.com
Subject: [Amps] MLA-2500 retrofit.

I have a buddy with TWO   MLA-2500's..... and both now with flat/bad
tubes. 

I believe one of them has a tuned input, and the 2nd one does not. 

Is the tube really unavailable ?      If so, what are his options ?
What other tube[s] can be retrofitted ? 

What is the easiest retrofit available ?     Does anybody do these
retrofits as a sideline ?? 

later... Jim   VE7RF

_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps