[Amps] Semtech SA1388?

[la7sl Nils Petter]

Semtech has produced a component numbered SA1388-1- at least for military
purposes. I found a report named  :
Corrosion of SA1388-1 Diodes

Carol Krska and Chuck Stimetz

Allied Signal - FM&T

Jeff Braithwaite, Rob Sorensen, and Paul Hlava

Sandia National Laboratories - NM

.......

I am sorry to say this deals with a mechanical problem only--

no electrical specs found.

But at least Semtech did produce it...  :-)



----- Original Message ----- 
From: "Paul Christensen" <w9ac at arrl.net>
To: <amps at contesting.com>
Sent: Wednesday, March 31, 2010 10:26 PM
Subject: Re: [Amps] Semtech SA1388?


>> showing the anode/cathode ends.  Also, the number "6824" is printed on 
>> the
>> case following the diode schematic.
>
> "6824" could relate to the manufacturing date code of the 24th week of 
> 1968,
> although I've not seen many four-digit date codes used on components 
> before
> the mid '70s.  Semtech was around in 1970 when Alpha produced its first 
> two
> amps, so perhaps it's a valid date code.
>
> I checked my Semtech data sheets and find nothing on it.
>
> Paul, W9AC
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 
-------------- next part --------------

No virus found in this outgoing message.
Checked by AVG - www.avg.com 
Version: 9.0.798 / Virus Database: 271.1.1/2781 - Release Date: 03/31/10 08:32:00