[Amps] HV Connectors

[James Colville]

I use Kings, SHV. You can see them in use in the pictures of my 8877
amplifier and power supply at:



http://s900.photobucket.com/albums/ac206/w7ry/8877%20Amplifier/

73
Jim W7RY


On Sun, May 23, 2010 at 12:31 PM, Barrie Smith <barrie at centric.net> wrote:

> Some time ago, there was a thread concerning HV connectors and HV wire.
>
> I did not pay too much attention at the time, because I had no needs,
>
> Things have changed, and I find myself building a small amp for 10 and 15M,
> only (My HB 10 through 160 has never worked on 10 or 15).  The HV will only
> be 2 KV.
>
> I found the thread, but it appears to be one of those that went in all
> directions.
>
> I think the post that caught my attention was one by (I think) Bill, W6WRT.
>  He mentioned a connector that was similar to a BNC where the ground had to
> be made before the HV was connected.
>
> I'd like to know what they are and where to get them.
>
> 73, Barrie, W7ALW
> Barrie, W7ALW, DN36au,
> QRV 6M, 432 & 1296 EME
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>