[Amps] FW: IRF parts

[Jim Dawson]

You and many others feel the same way, but the powers to be think it is best.

Jim - K9DD


----- Original Message ----- 
From: "MIKE DURKIN" <patriot121 at msn.com>
To: "amps fourm" <amps at contesting.com>
Sent: Thursday, October 21, 2010 7:19 PM
Subject: [Amps] FW: IRF parts


>
> I hate it when i reply and it goes to the individual and not the group ...
>
> From: patriot121 at msn.com
> To: wlfuqu00 at uky.edu
> Subject: RE: [Amps] IRF parts
> Date: Thu, 21 Oct 2010 17:18:27 -0700
>
>
>
>
>
>
>
>
> I wanted to compare power to input capacitance ..
>
> Mike
> KC7NOA
>
>> From: wlfuqu00 at uky.edu
>> To: patriot121 at msn.com
>> Date: Thu, 21 Oct 2010 19:19:17 -0400
>> Subject: RE: [Amps] IRF parts
>>
>>   I just look at the data sheets online. Usually go to mouser.com and search 
>> for the device and then click on data sheet.
>> Bill wa4lav
>>
>> ________________________________________
>> From: amps-bounces at contesting.com [amps-bounces at contesting.com] On Behalf Of 
>> MIKE DURKIN [patriot121 at msn.com]
>> Sent: Thursday, October 21, 2010 3:30 PM
>> To: amps fourm
>> Subject: [Amps] IRF parts
>>
>> Any one know of a list showing the input capacitance of IRF HexFet line??
>>
>> MIke
>> KC7NOA
>> _______________________________________________
>> Amps mailing list
>> Amps at contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps