[Amps] GS-35b
MIKE DURKIN
patriot121 at msn.com
Wed Sep 8 15:42:03 PDT 2010
Thats what i figured - but she is still stuck true. (wonder if that's a sign of over heating??) I removed the large nut, spring washer and the washer underneath - still stubborn. The washer removed was slightly larger than the spring washer - is there another that over 1.5Inch diameter ??
Any one have some step by step pics's that are of good resolution ??
Mike
KC7NOA
>
> To: patriot121 at msn.com
> Subject: RE: [Amps] GS-35b
> Date: Wed, 8 Sep 2010 23:18:00 +0200
>
> Mike,
> Just release the screw inside the spreader, I use a coin or very big
> screwdriver.
> Then just push and turn a bit and it schould release.
> Best regards,
> Jan ON6ZG.
>
> -----Oorspronkelijk bericht-----
> Van: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] Namens
> MIKE DURKIN
> Verzonden: woensdag 8 september 2010 23:07
> Aan: amps fourm
> Onderwerp: [Amps] GS-35b
>
>
> Any one know how to remove the heat spreader from the triode (gs35b) ??
>
> Mike
> KC7NOA
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
More information about the Amps
mailing list