[Amps] GS35B Another Tip

[Alek Petkovic]

The GS35B can be a little difficult to handle or remove from the socket.

To overcome this problem, I made up a small T bar from 1/2 inch 
copper pipe and on the bottom of it, I silver soldered a hex head 
bolt with the same thread as the cooler retainer nut on the GS35B. I 
simply screw the bolt into the top of the nut and pull on the handle 
and out comes the tube.

73, Alek
VK6APK


http://www.qrz.com/db/vk6apk
http://www.qrz.com/db/vk6ap