[Amps] GS35B questions

[Bill, W6WRT]

ORIGINAL MESSAGE:

On Fri, 10 Sep 2010 00:03:26 +0200, Marius Hauki
<rezycle.bin at gmail.com> wrote:

>
>-I am looking for a SAFE way of running the HV cable from an external
>HV PSU cabinet to the RF cabinet.  I know this has been discussed
>numerous times before, but again: what is the best cable I can use and
>what connector should I use? Did we reach a conclusion and some
>reccomendation on that question? I would like to avoid any possibility
>at all for the B+ (hv plus)connector connecting before the B- (hv
>minus) because that may place the RF deck at the HV+ potential if the
>grounding between the two boxes are broken.

REPLY:


Please look at:  http://www.surplussales.com/Wire-Cable/HVWire-2.html

What you want is the top two pictures, male and female. Note they are
polarized - one leg is longer than the other. Unfortunately this
source is sold out, but this is the type of connector to search for. 

If you decide to go for a single plug with a hardwired ground between
the amp and PS, have a look at the third one down on the left. That is
the one I use in my homebrews and it has been very satisfactory. 

Bill, W6WRT