[Amps] Dentron 160 - 10L

[Carl]

Drill holes, add jumpers and epoxy Snap-Ins to the board is one option. 
Another is to remove the guts from the cans and slide in a Snap-In. Ive done 
it both ways.

Carl
KM1H


----- Original Message ----- 
From: "Tim Kass" <k8wbl at yahoo.com>
To: <amps at contesting.com>
Sent: Sunday, April 03, 2011 12:24 PM
Subject: [Amps] Dentron 160 - 10L


Hello group, still working on my Dentron amp...thanks to Mike Baker for 
helping out a great deal...fixed most..but now need to replace the large 
caps. Problem I can only find screw type or snap in caps, neither which are 
really exact replacement for the old style metal cans that are mounted in 
these..I was wondering what others have done..mounted another board circuit 
board or just what imaginative things can be done here.. thanks... I include 
a pic..

NOTE: You can see the Temporary board for the diodes, going to re-mount them 
on a piece of plexiglass...just made it easier to reach...large hands...hi 
hi

73, Tim K8WBL





--------------------------------------------------------------------------------


> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>