[Amps] IR thermometer results
Larry Benko
xxw0qe at comcast.net
Sat Apr 9 21:46:58 PDT 2011
I just did the test several people had hypothesized about in the past
few days and the test was done with 2 different IR thermometers.
1.) Thermometer was aimed at a black anodized aluminum heat sink at 18
deg. C
2.) A 1/2 diameter 100 deg. C air stream was directed across the air
gap between the thermometer and the heat sink about 1-2" in front of the
thermometer. The air stream did not heat the heat sink or the
thermometer directly.
3.) The temperature measured by the thermometer rose about 1-2 deg. C.
One thermometer was a close focus thermometer with the distance from the
thermometer to the heat sink of about 1.5" and the other was a more
standard IR thermometer with the distance of about 12". This test shows
that the actual air temperature between the thermometer and the object
being measured has very little effect.
73,
Larry, W0QE
More information about the Amps
mailing list