[Amps] Wiring Expert 1K-FA Linear Amplifier & Yaesu FT2000..help needed!

[Roger (sub1)]

On 4/13/2011 12:19 AM, Stein Roar Brobakken wrote:
> Hi
>
>
>
> I am going to setup a new Expert PA and a Yaesu FT2000.
>
> In the SPE manual http://www.ea4tx.com/files/EXPERT1K-FA-EN.pdf
>
>

If you search the archives we went through this about two years ago when 
I was hooking up a Tokyo Hy-Power HL-1.5Kfx to a Yaesu FT897D.  The 897D 
uses the mini DIN connector with a different pin out, so we had to 
convert from the regular DIN to the Mini.  There were several who posted 
the pinouts for the 2000 IIRC.

73

Roger (K8RI)


> we want to use the BAND Data Interface from Yaesu FT2000>  PA

Somewhere in that Yaesu manual should be a listing of the connectors and 
which one is used for  the "band data" out.
The manuals are also available in downloadable PDFs on the Yaesu site, 
which are searchable. That might help.

73 and good luck,

Roger (K8RI)