[Amps] Roller Inductor Choices
Roger (sub1)
sub1 at rogerhalstead.com
Thu Apr 14 21:37:30 PDT 2011
On 4/14/2011 7:56 PM, Bill Smith wrote:
> I plan on using a roller inductor with two GI-46B tubes in the old Swan Mark 1. Is the edge wound the one I should use? How many amps should it be rated for?
I don't know if the base is the same as the GI-7B but it might be. Check
the sizes and if they are, there is a guy who makes sockets for them on
e-bay. You can mount them without sockets but they do need air for
axial cooling...unless you change the cooler to one that works with
transverse cooling.
73
Roger (K8RI)
> 73,
> Bill Smith KO4NR
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
More information about the Amps
mailing list