[Amps] DIN vs N

[DF3KV]

Yes, as said before, I use 5/8" Cellflex (LCF58-50)by RFS on 144MHz around
the rotator. The Andrew type will be LD4.5-50.

73
Peter

-----Original Message-----
From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On
Behalf Of donroden at hiwaay.net
Sent: Dienstag, 26. April 2011 00:36
To: amps at contesting.com
Subject: Re: [Amps] DIN vs N

I think the plain ole PL259 due to more contact area will handle more AMPS
than a type N at 6M and below.

But again, is there a larger cable than 213 for rotor duty ?

Don W4DNR

_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps