[Amps] MRFE6VP Datasheet

Fuqua, Bill L wlfuqu00 at uky.edu
Sun Aug 21 20:34:54 PDT 2011

I have not looked very close at the data sheet but it did occur to me that 
in some applications some devices require time to thermally or electrically stabalize.
But, you may be right. I'll look closer.
bill wa4lav

From: amps-bounces at contesting.com [amps-bounces at contesting.com] On Behalf Of jeff millar [wa1hco at wa1hco.net]
Sent: Sunday, August 21, 2011 9:24 PM
To: amps at contesting.com
Subject: Re: [Amps] MRFE6VP Datasheet

I think the pulse operation applies to the 60:1 VSWR specification.
Effectively, that gives a specification on how fast the control circuit need to

jeff, wa1hco

On 08/21/2011 08:06 PM, Fuqua, Bill L wrote:
>    If it will do 1200W average power CW it should do the same in pulsed mode.
> The question is, why list both unless some application requires that particular
> pulse specification. It could be that the product was targeted for that application.
> And others (CW).
> 73
> Bill wa4lav

Amps mailing list
Amps at contesting.com

More information about the Amps mailing list