[Amps] [rfamplifiers] Re: Xmas special offer upadate( warranty and pictures)

Vic K2VCO k2vco.vic at gmail.com
Wed Dec 21 08:00:45 PST 2011


If what we are talking about is the transformers, a transformer rated for 50 Hz will work 
fine at 60 Hz -- in fact, it will run cooler. The opposite is not necessarily the case, 
especially with large transformers.

Some AC fan motors might run a bit faster. I don't see that as a problem. I can't think of 
anything in an amplifier that would require 50 Hz and not work properly at 60!

On 12/20/2011 8:23 PM, Herschel Williamson wrote:
> Photos show that this amplifier requires 50 Hz power at 230 volts.  Good luck with that.
>
> Sent from my iPhone
>
> On Dec 15, 2011, at 7:04 AM, "Hsu"<hsu4qro at gmail.com>  wrote:
>
>>
>> We have a holiday special from now till Dec. 25.
>> Our manual tune amplifier with 4 switchable antenna ports, $3,500.
>> The auto tune version, $5,000.
>> Free shipping included worldwide. Normal delivery time is approximately 15-20 days  orso
>> .
>> But if the order too much, It will delay to March 2012 , we have a long holiday from 8 Jan  to 1 March.
>>
>>
>> Payable via Westurn Union and bank transfer.My Payal still not active. but I hope it  usuable in this month.
>> Full warranty for   one year( tube) and three years( amplifeir).
>>
>> Our amplifier specifications:
>> Tube: One long life FU-728F forced air tetrode
>> Power out: 2000W(CW)/2500W(SSB)/1500W (RTTY).
>> 3rd order IMD: -32db
>> weight: Manual tune amp approx 40kg (88 lbs)
>>          Auto tune amp approx 43 kg(95 lbs)
>> Frequency coverage:  160-10m (including WARC bands)
>> Transformer: two Hypersil ring core transformers for balancing the weight
>>
>> The amplifier is shipped with transformers installed.
>>   some  the hi-resolution  pictures here:http://www.zmdz.com/bbs/photobook.asp?page=1&name=DeepBlue&ClassID=0
>> More detail and pictures on request off line.
>>

-- 
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/



More information about the Amps mailing list