[Amps] Dans amp band switch
Rex Lint
rex at lint.mv.com
Sun Dec 25 10:51:16 PST 2011
Look at picture 33 - it's mounted on standoffs. Picture 27 must have just been for positioning...
-Rex-
K1HI
Rex Lint
Merrimack, NH
WWW.QRZ.COM/db/k1hi
-----Original Message-----
From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On Behalf Of Fuqua, Bill L
Sent: Thursday, December 22, 2011 11:55 PM
To: amps at contesting.com
Subject: Re: [Amps] Dans amp band switch
I looked at the pictures and did not see a bandswitch and noticed a few odd things.
One, was that one end of plate coil was grounded. maybe this was just a temporary
position while positioning things. The only vacuum relay I saw was a TR Switch.
However, I noticed the use of what appeared to be "Red" toroids for parasitic supressors.
73
Bill wa4lav
________________________________________
From: amps-bounces at contesting.com [amps-bounces at contesting.com] On Behalf Of Hsu [hsu4qro at gmail.com]
Sent: Thursday, December 22, 2011 3:04 AM
To: amps at contesting.com
Subject: [Amps] Dans amp band switch
Dans amp use HV relay, Could anybody can tell me where can get the relay? here is the pictures
http://www.oz7akt.dk/MyPowerAmp/Danamps/amp.htm
73!Hsu
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps
More information about the Amps
mailing list