[Amps] Dans amp band switch

[vk3pa at vk3pa.com]

look at photo #44 u can c switch above load cap.going by front panel  
layout the band sw is on top of load cap top r/h corner look at front  
panel from the front of de amp. look like a fairly heavy but only  
single pole!!
HNY to all

Quoting "Fuqua, Bill L" <wlfuqu00 at uky.edu>:

> I looked at the pictures and did not see a bandswitch and noticed a   
> few odd things.
> One, was that one end of plate coil was grounded. maybe this was   
> just a temporary
> position while positioning things.  The only vacuum relay I saw was   
> a TR Switch.
> However, I noticed the use of what appeared to be "Red" toroids for   
>  parasitic supressors.
> 73
> Bill wa4lav
>
> ________________________________________
> From: amps-bounces at contesting.com [amps-bounces at contesting.com] On   
> Behalf Of Hsu [hsu4qro at gmail.com]
> Sent: Thursday, December 22, 2011 3:04 AM
> To: amps at contesting.com
> Subject: [Amps] Dans amp band switch
>
> Dans amp use HV relay, Could anybody can tell me where can get the   
> relay?  here is the pictures
>  http://www.oz7akt.dk/MyPowerAmp/Danamps/amp.htm
>      73!Hsu
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>