[Amps] LK500ZA BLOWING FUSES

[Gudguyham at aol.com]

Remove tubes, replace fuse, turn on, no blow?  bad tube.  Blow?  shorted 
diode in PS or filter cap.  B+ short to ground.  Thats about  it unless safety 
choke is shorted from shorted blocking cap.
 
 
In a message dated 1/3/2011 3:42:10 A.M. Eastern Standard Time,  
w1ctn at yahoo.com writes:

To  all:
When I turned the amp on today it blew the fuses. 
An ideas where  to start looking for the culprit  part/parts?

73
Dave
W1CTN




_______________________________________________
Amps mailing  list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps