[Amps] Fuses

[Paul Kraemer]

Anyone interested I have many surplus P&B or Airpax 2 pole 20A 240vac 
breakers that are panel mount
Removed from working industrial controls
$2.50 each plus postage
Paul K0UYA

----- Original Message ----- 
From: "Jim Thomson" <jim.thom at telus.net>
To: <amps at contesting.com>
Sent: Friday, January 07, 2011 6:02 PM
Subject: [Amps] Fuses


> Date: Fri, 7 Jan 2011 10:45:07 -0500
> From: "Carl" <km1h at jeremy.mv.com>
> Subject: Re: [Amps] Fuses
>
> Just dont over fuse. The usual 1200W out amp uses 10-12A; 15A for
> 1500-2200W, etc at 240VAC.
>
> Carl
> KM1H
>
> ##  why  didn't they just get off the..'get cheap program'  and use a fast 
> breaker ??
> Ideally, a 2 x pole, 15A , controlled magnetic hydraulic breaker   would 
> be the 1st choice,
> one with an..."instant trip" .    The instant trip types are the fastest. 
> They just remove the oil
> from the reservoir, so it's super fast.  The normal, slow, and motor start 
> types  just use different grades
> of viscosity for the oil used.   I use em all the time for my various HB 
> projects.   Any HB  B+  supply
> always gets a super fast magnetic hydraulic  breaker..for the primary of 
> the plate xfmr.   [they are also NOT
> affected by ambient temp either].
>
> ##  My Drake L4PS power supplies use 2 x 15A breakers, spaced a few inch's 
> apart.  One per hot leg.
> These are the simple  push button type.  [ push to re-set].   The 
> advantage  of the 2 x pole type noted above is..
> the trip bar between em ensures  both sides of the 240 line open up.
>
> ##  You would think for the megabuck that alpha charges for their amps, 
> that they would not cheap out..and use
> simple fuses !
>
> Later... Jim   VE7RF
>
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps