[Amps] : Fasteners

[.Tim .xiang]

If Anyone need Fasteners pls contact me.
 
Small qty and large qty.
Standard DIN/ANSI. OEM accepted
Material: SuS304/316  Alloy Steel & Carbon steel.
 
Fasteners; Screw/Bolts/Rivets/Rivet Nuts/Weld Screw/Weld Nuts/Washers/Pins/Hex Nuts and Special Items OEM accepted.
 
Email; robin at gzsfhardware.com
 
Thanks Guys.
Robin

 > From: elespe at lisco.com
> To: jim.thom at telus.net; amps at contesting.com
> Date: Fri, 7 Jan 2011 19:41:04 -0600
> Subject: Re: [Amps] Fuses
> 
> Anyone interested I have many surplus P&B or Airpax 2 pole 20A 240vac 
> breakers that are panel mount
> Removed from working industrial controls
> $2.50 each plus postage
> Paul K0UYA
> 
> ----- Original Message ----- 
> From: "Jim Thomson" <jim.thom at telus.net>
> To: <amps at contesting.com>
> Sent: Friday, January 07, 2011 6:02 PM
> Subject: [Amps] Fuses
> 
> 
> > Date: Fri, 7 Jan 2011 10:45:07 -0500
> > From: "Carl" <km1h at jeremy.mv.com>
> > Subject: Re: [Amps] Fuses
> >
> > Just dont over fuse. The usual 1200W out amp uses 10-12A; 15A for
> > 1500-2200W, etc at 240VAC.
> >
> > Carl
> > KM1H
> >
> > ## why didn't they just get off the..'get cheap program' and use a fast 
> > breaker ??
> > Ideally, a 2 x pole, 15A , controlled magnetic hydraulic breaker would 
> > be the 1st choice,
> > one with an..."instant trip" . The instant trip types are the fastest. 
> > They just remove the oil
> > from the reservoir, so it's super fast. The normal, slow, and motor start 
> > types just use different grades
> > of viscosity for the oil used. I use em all the time for my various HB 
> > projects. Any HB B+ supply
> > always gets a super fast magnetic hydraulic breaker..for the primary of 
> > the plate xfmr. [they are also NOT
> > affected by ambient temp either].
> >
> > ## My Drake L4PS power supplies use 2 x 15A breakers, spaced a few inch's 
> > apart. One per hot leg.
> > These are the simple push button type. [ push to re-set]. The 
> > advantage of the 2 x pole type noted above is..
> > the trip bar between em ensures both sides of the 240 line open up.
> >
> > ## You would think for the megabuck that alpha charges for their amps, 
> > that they would not cheap out..and use
> > simple fuses !
> >
> > Later... Jim VE7RF
> >
> >
> > _______________________________________________
> > Amps mailing list
> > Amps at contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps 
> 
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps