[Amps] Amp Chassis

[Carl]

Creativity is fine, butchered metal work is not.

Provide a basic clamshell cabinet and a tube sub chassis and let the builder 
do the rest.

Amp Supply was pure genius in getting 12 amps into one basic cabinet. More 
if you count the custom QRO builds they did.

Carl
KM1H


----- Original Message ----- 
From: "Fuqua, Bill L" <wlfuqu00 at uky.edu>
To: "Carl" <km1h at jeremy.mv.com>; <amps at contesting.com>
Sent: Friday, June 10, 2011 5:27 PM
Subject: RE: [Amps] Amp Chassis


But that is ham radio, creativeness not just carbon copy, step repeat, just 
add more and more amplifiers in parallel.
There are no Standardized designs. "We are the Borg, you will be...".
73
Bill wa4lav

________________________________________
From: Carl [km1h at jeremy.mv.com]
Sent: Friday, June 10, 2011 5:14 PM
To: Fuqua, Bill L; amps at contesting.com
Subject: Re: [Amps] Amp Chassis

They have been around for a long time and I guess hams didnt do enough
building to keep them in business.

If hams were smart they would standardize on a couple of amp designs and
then buy ready made metal work with thinks like socket and meter holes
already done.

Carl
KM1H


----- Original Message -----
From: "Fuqua, Bill L" <wlfuqu00 at uky.edu>
To: <amps at contesting.com>
Sent: Friday, June 10, 2011 1:54 PM
Subject: Re: [Amps] Amp Chassis


>I believe their normal customers are CB'ers building high power solid state
>27 MHz amplifiers.
> Look at their products. The power combiners don't even have a frequency
> spec. Most likely
> for 27 MHz use. They sell SS amplifer kits up to many kW.
>
> 73
> Bill wa4lav
>
> ________________________________________
> From: amps-bounces at contesting.com [amps-bounces at contesting.com] On Behalf
> Of Carey Lockhart [kc5gtt at gmail.com]
> Sent: Friday, June 10, 2011 1:17 PM
> To: Wt8r at aol.com; amps at contesting.com
> Subject: Re: [Amps] Amp Chassis
>
> i have been getting may cases at
> http://icamanufacturing.homestead.com/ACCabinets.html. but there are a few
> pieces i still have to make which is really time consuming. plus machine
> cut
> pieces are so much cleaner. i have a metal break and metal tools just no
> patience
>
> Carey
>
> On Fri, Jun 10, 2011 at 10:59 AM, <Wt8r at aol.com> wrote:
>
>>  In a message dated 6/9/2011 9:36:22 PM Central Daylight Time,
>> kc5gtt at gmail.com writes:
>>
>> I am looking for a reasonable priced sheet metal shop. i need some of my
>> chassis parts made. also would like to get the plate lines jet cut. shure
>> would save me time.
>>
>> Carey
>> _______________________________________________
>> Amps mailing list
>> Amps at contesting.com
>> http://lists.contesting
>>
>>
>> IF YOU GET SOME REASONABLE REPLIES, I WOULD APPRECIATE YOU FORWARDING
>> THEM
>> TO ME.
>>
>> 73 DE
>>
>> DAVE, WT8R
>>
>
>
>
> --
> Carey Lockhart, KC5GTT
> Boerne, Tx. 78006
> www.kc5gtt.com
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1382 / Virus Database: 1513/3692 - Release Date: 06/10/11
>



-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1382 / Virus Database: 1513/3693 - Release Date: 06/10/11