[Amps] Voltage Doubler Regulation

[Frederick Mott]

I believe you need a Line-Side Regulator for your high voltage supply.  See
QST May 1987 QST *(Updated Jan 1992 QST) and for an article by AA5C.  The
regulator (Triac)  is in series with the primary winding and a sample is
obtained from the high voltage output.  

Fred, AB8AH


-----Original Message-----
From: amps-bounces at contesting.com [mailto:amps-bounces at contesting.com] On
Behalf Of Richard Solomon
Sent: Sunday, June 12, 2011 3:12 PM
To: amps at contesting.com
Subject: [Amps] Voltage Doubler Regulation

I would like to look at ways to improve the Voltage Regulation in a Voltage
Doubler Circuit.
I tried Google, but didn't get much on the actual calculations involved.

Since we have certain givens; such as The AC Line is what it is, the Plate
Xfmr is what it is, the only variable in the equation would be the Capacitor
value. Am I correct in that assumption ?

Can anyone point me to a reference that I can use ?

Thanks, Dick, W1KSZ
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps