[Amps] Centurion
Mitch Cox
ww4cox at embarqmail.com
Sun Jun 19 13:36:37 PDT 2011
I would send the old display board back to Ten-Tec and swap it with them for the newer updated version and problem solved. They are very good about board swapping.
----- Original Message -----
From: Dan Atchison
To: Mitch Cox
Cc: Jim W7RY ; amps at contesting.com
Sent: Sunday, June 19, 2011 4:34 PM
Subject: Re: [Amps] Centurion
Yep. No plate current, do have HV. No Ig.
On 6/19/2011 4:31 PM, Mitch Cox wrote:
I believe what he is saying is that the bar graph, peak reading display is showing power by being lit up after one of the transistors shorted. They also have a mechanical meter installed on that unit also.
----- Original Message -----
From: Jim W7RY
To: Dan Atchison ; amps at contesting.com
Sent: Sunday, June 19, 2011 4:29 PM
Subject: Re: [Amps] Centurion
Can you be a little more specific Dan?
73
Jim W7RY
--------------------------------------------------
From: "Dan Atchison" <N3ND at aol.com>
Sent: Sunday, June 19, 2011 1:21 PM
To: <amps at contesting.com>
Subject: [Amps] Centurion
> TenTec Centurion reads power output with no input. Display agrees with
> internal meter. There is no output.
>
> Has anyone seen Q1 short on the display board before?
>
> 73,
> Dan
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1382 / Virus Database: 1513/3713 - Release Date: 06/19/11
>
_______________________________________________
Amps mailing list
Amps at contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1382 / Virus Database: 1513/3713 - Release Date: 06/19/11
------------------------------------------------------------------------------
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1382 / Virus Database: 1513/3713 - Release Date: 06/19/11
More information about the Amps
mailing list