[Amps] SB200 diodes post script

[Carl]

Congrats Kathy.

And the VU4 was loud on 10M this morning.

Carl
KM1H


----- Original Message ----- 
From: "Kathy Bookmiller" <wb2aio at yahoo.com>
To: <amps at contesting.com>
Sent: Wednesday, March 30, 2011 1:17 PM
Subject: [Amps] SB200 diodes post script


>I wish to thank everyone for their input on my diode problem. Just wanted 
>to let everyone know that they arrived from Mouser yesterday afternoon 
>(Tuesday) This was a pleasant surprise to me since I'd checked the tracking 
>number the night before and it said they would arrive Wednesday! Rather 
>strange that UPS got that wrong. I hadn't relished removing the diode board 
>from the amp., with all the taking it apart to do to be able to remove it. 
>So I removed all the old diodes, drilled out the holes a bit to accommodate 
>the larger lead size and mounted the new ones on the bottom of the board or 
>up-side down as I figured they won't know if someone doesn't tell them. I 
>had checked the filter caps and the tubes earlier while waiting for the UPS 
>guy to show and there wasn't any problems indicated with them.
> Put it back together and it is back working fine:)
> It is nice knowing it is ready for when a P5 shows....
> 73,
> Kathy, RN
>
> _______________________________________________
> Amps mailing list
> Amps at contesting.com
> http://lists.contesting.com/mailman/listinfo/amps